Retraact-It 9800 Universal 3-In-1 LCD Television Mount
By admin On January 25th, 2010
- Fits 12 to 31 inch wide LCDs
- Fixed, 5 and 10 degree tilt positions
- 150 degree swivel and tilt
- Top leveling and bottom locking systems
- Durable powder coated silver finish
Product Description
Display your small LCD television set or computer monitor like a work of art on the wall with this heavy duty flat panel TV wall mount! This LCD TV mount fits monitors and TV sets measuring 12″-31″ wide. The TV wall mount bracket features multiple articulating positions from fixed, 5 or 10 degree tilt positions, and 150-degree swivel and tilt. The versatility of positions makes the wall mount bracket ideal for mounting a flat panel TV set in an area like the kit… More >>
Retraact-It 9800 Universal 3-In-1 LCD Television Mount
Related posts:
- VideoSecu Dual Swivel Tilt Arm TV Wall Mount for Flat panel Screen Plasma & LCD Television with Free 7ft HDMI Cable MW360BH 1SR
- Cheetah Mounts APTMMB 32-55″ LCD Flat Screen TV Wall Mount Bracket with Universal Tilt Flush Mount Mounting Brackets for Flat Panel Plasma, LED, & LCD Displays
- Cheetah Mounts APTMM2B Flat Screen TV Wall Mount Bracket, uses Universal Tilt Mount 32-55″ – Plasma, LED, LCD TV Wall Mounts Mounting Brackets
- Brand New VideoSecu Television Mounts LCD Plasma TV Wall Mount Systems Fits Samsung Sony Panasonic 32 in to 58 in TV With Free 7ft HDMI Cable M43
- Vanguard VM-311C Flip Down Type Television Wall Mount
Benjamin Gencarelle Says: January 25th, 2010 at 11:17 pm
This came with the wrong bracket, also very flimsy. Also. Last time I buy heavy stuff online.
Rating: 2 / 5
Richard Bauer Says: January 26th, 2010 at 12:59 am
I mounted a 22″ LCD PC monitor using this mount. The company bares no expense in providing installation hardware and an adapter plate. I didn’t need the adapter plate and the provided hardware was sufficient to get the mount up on the wall and attached to the stud; and, get the mounting bracket for the monitor attached to the four (4) VESA 100mm threaded inserts on the monitor back. From there it’s a simple matter to attach the monitor to the wall mount, adjust the tilt and tighten the hardware.
As another reviewer commented, it is overkill for my application but if I move up to a larger monitor I have no doubt that this mount will do the job.
Rating: 5 / 5
Mike B Says: January 26th, 2010 at 1:49 am
I purchased this bracket to mount a 23′ LCD computer monitor on the wall.
Fortunately, this bracket comes with an adapter that compensates for different angles of the backplates of different monitors.
My new Dell monitor has a slanted back, so I needed to use the adapter.
As for the bracket itself, it’s very heavy duty. To a point where it’s overkill for my monitor.
As other reviews have stated, when retracted, it still projects from the wall about 8 1/2″ (in my case), but it’s not a big deal.
This is a better bracket and MUCH less expensive as the one’s I looked at in Best Buy and Walmart.
Highly Recommended.
Rating: 5 / 5
Rick Tharp Says: January 26th, 2010 at 3:54 am
I bought this mount to replace one that I had purchased at Lowe’s.
Pros: strong, sturdy metal construction; heavy-duty hardware and screws; snap-on plastic cover neatly hides the mounting screws. Installation was a breeze compared to my previous experience with the Lowe’s product. This mount has two sections, one is screwed to the wall and the other to the TV. Then you simply hang the TV section into a slot on the wall section, very elegant.
Cons: The only fault I could find was the arm doesn’t snug up as close to the wall as I’d like. The pictures here are accurate, use them to judge if the mount will suit your application.
This mount is priced well below similar ones listed on Amazon, but don’t mistake price for quality. I highly recommend this sturdy articulating wall mount, it is a true value for your money.
Rating: 5 / 5