CHEETAH MOUNTS LCD TV ARTICULATING ARM WALL MOUNT FOR 23-37″ DISPLAYS BLACK
By admin On December 31st, 2009
- Fits VESA 100 and 200, Up To 65Lbs
- 180 Degrees Swivel, 19.5-Inch Extension
- Single Stud Installation, Powder Coat Paint
- 30 Degrees Of Tilt Up Or Down
- Installation Manual And All Hardware Included
Product Description
The ALAML 75x75mm, 100x100mm, 100x200mm, 200x200mm VESA arm mount provides up to 21″ of extension, collapses to less than 4″, has 180 degrees of rotation and +/- 20 degrees of tilt. The ALAML mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The ALAML uses separate cover pieces for the wall plate and pivot joints providing a clean finished look. The ALAML mount will fit the majority of LCD Displays up to 37″. Most LCD Dis… More >>
CHEETAH MOUNTS LCD TV ARTICULATING ARM WALL MOUNT FOR 23-37″ DISPLAYS BLACK
Related posts:
- Unibrak UNB 550 Dual Arm Articulating Cantilever LCD Plasma LED TV Wall Mount 37″ 42″ 50″ 58″ 65″ Sony LG Panasonic Samsung Pioneer
- VideoSecu TV Wall Mounts for 30″ 32″ 37″ 40″ 42″ 45″ 46″ 50″ 52″ 55″ Flat Panel LED LCD Plasma Screen Bracket and Display MW52B
- VideoSecu Wall mount for LCD Monitor Flat Screen TV with Swing Arm VESA100/75 -ML10B 1E9
- VideoSecu Dual Swivel Tilt Arm TV Wall Mount for Flat panel Screen Plasma & LCD Television with Free 7ft HDMI Cable MW360BH 1SR
- PYLE-HOME PSW446F – 10 X 32 Inch Flat Panel Tv Wall Mount
Tasha Brooke Rhinehart Says: December 31st, 2009 at 5:03 pm
Very heavy box, and haven’t put it up yet but this seems like a great product, can’t wait to put it up…
Rating: 5 / 5
JRSpN Says: December 31st, 2009 at 6:03 pm
Got mount for my 32″ sharp. was confused about the mounting hole in the center of wall plate called cheetah mounts. The center hole is not nessacarry their are 6 other places for screws to mount to the wall. Have had no problems with mount since installed. The arms were very tight out of the box i loostened them to make installation easier, when hanging TV their was a little sag but after tightening the bolts i loostened back up that went away. Great mount asy to install. If you are going to use the 4″x4″ hole pattern you need to take 4 philips bolts out and remove the 8″ plate. Not hard to do. This is a great mount and when i called in at 6:30PM there was no answer but i received a call back the following morning. It was great customer service. Will be buying a mount for my 52″ soon
Rating: 5 / 5
Amazon Shopper2 Says: December 31st, 2009 at 8:53 pm
Like a couple of other people have stated, this mount is not the most steady, but does the job. Taking it apart is definitely the way to go to mount on the wall. I will probably buy a smaller mount to use for my PC monitor. The price certainly is right
Rating: 3 / 5
James J. Schreiner Says: December 31st, 2009 at 9:08 pm
Very good mount. I like the idea of pulling the TV from the wall if I desire and the up and down tilt the mount provides. All mounting hardware is included with the mount including a level and hex wrenches (metric). Highly recommended.
Rating: 5 / 5
J. Draper Says: December 31st, 2009 at 11:45 pm
This mount is probably not even close to the best mount you can get but it surely gets the job done. You have to pretty much disassemble the entire thing to hang it and then once it is hung it is kinda wobbly, but I am not afraid that it will FAIL. For the price what do you expect. Good enough for my 32″ LCD.
Rating: 3 / 5